Termination Kit

Product Details:

 Raychem Rpg Cable Jointing Kit  INDOOR-OUTDOOR TERMINATION KIT . IT USED FOR CABLE TERMINATION. RAYCHEM IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF RAYCHEM 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR RAYCHEM . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS                  

Additional Information:

• Delivery Time: ready

Product Details:

3m indoor-outdoor termination kit . It used for cable termination. 3m is one of the most leading brand for cable termination and jointing . The have the maximum life when installed properly . We are authorised distributors of 3m 
we are one of the biggest distributors in north for 3m . We provide quality material to our customers 

Additional Information:

• Production Capacity: 110000
• Delivery Time: READY STOCK
• Packaging Details: 3M KIT

Product Details:

RAYCHEM  66 KV STRAIGHT THROUGH KIT . IT USED FOR CABLE TERMINATION. 3M IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF 3M 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR 3M . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS 

Product Details:

3m 3 core 1. 1 kv straight through kit  . It used for cable . 3m is one of the most leading brand for cable termination and jointing . The have the maximum life when installed properly . We are authorised distributors of 3m 
we are one of the biggest distributors in north for 3m . We provide quality material to our customers

Product Details:

Raychem Rpg Cable Jointing Kit  INDOOR-OUTDOOR TERMINATION KIT . IT USED FOR CABLE TERMINATION. RAYCHEM IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF RAYCHEM 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR RAYCHEM . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS                  

Product Details:

3M  Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

Kit Components

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

• Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
• Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
• Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
• Lugs to provide high-performance connections.
• Cleaning Solvent Pouches to clean the XLPE insulation surface.
• Worm Clips to ensure good electrical connection.
• Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
• Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
• Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
• Ferrules to protect against damage, splitting or wear.
• Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
• Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
• Steel Canister to be wrapped over the joints

Specifications

• Quick Cable Preparation
• Suitable for all types of conductors and connection shapes
• Environmental sealing by specially developed sealants
• Effective and reliable stress control
• Compact dimensions
• Immediate energisation possible

Additional Information:

• Delivery Time: READY STOCK

Product Details:

3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

• Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
• Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
• Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
• Lugs to provide high-performance connections.
• Cleaning Solvent Pouches to clean the XLPE insulation surface.
• Worm Clips to ensure good electrical connection.
• Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
• Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
• Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
• Ferrules to protect against damage, splitting or wear.
• Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
• Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.

Specifications

• Quick Cable Preparation
• Suitable for all types of conductors and connection shapes
• Environmental sealing by specially developed sealants
• Effective and reliable stress control
• Compact dimensions
• Immediate energisation possible

Product Details:

3m make 33kv cable jointing kit  3M 3 CORE 33 KV INDOOR OUTDOOR TERMINATION KIT IT IS USED FOR TERMINATIONOF CABLE . 3M IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF 3M 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR 3M . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS                   

Additional Information:

• Delivery Time: ready stock
• Packaging Details: 3m sealed box will be provided

Product Details:

3M  Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

Kit Components

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

• Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
• Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
• Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
• Lugs to provide high-performance connections.
• Cleaning Solvent Pouches to clean the XLPE insulation surface.
• Worm Clips to ensure good electrical connection.
• Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
• Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
• Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
• Ferrules to protect against damage, splitting or wear.
• Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
• Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
• Steel Canister to be wrapped over the joints

Specifications

• Quick Cable Preparation
• Suitable for all types of conductors and connection shapes
• Environmental sealing by specially developed sealants
• Effective and reliable stress control
• Compact dimensions
• Immediate energisation possible

Additional Information:

• Delivery Time: ready stock
• Packaging Details: 3m packaging

Product Details:

 Raychem Rpg Cable Jointing Kit           Raychem Rpg Cable Jointing Kit  INDOOR-OUTDOOR TERMINATION KIT . IT USED FOR CABLE TERMINATION. RAYCHEM IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF RAYCHEM 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR RAYCHEM . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS                  

Product Details:

3m 6. 6kv end termination  3m 3 core 6. 6 kv indoor outdoor termination kit it is used for terminationof cable . 3m is one of the most leading brand for cable termination and jointing . The have the maximum life when installed properly . We are authorised distributors of 3m 
we are one of the biggest distributors in north for 3m . We provide quality material to our customers

Product Details:

3m 3 core 11 kv indoor-outdoor termination kit . It used for cable termination. 3m is one of the most leading brand for cable termination and jointing . The have the maximum life when installed properly . We are authorised distributors of 3m 
we are one of the biggest distributors in north for 3m . We provide quality material to our customers

Product Details:

Raychem Rpg Cable Jointing Kit  INDOOR-OUTDOOR TERMINATION KIT . IT USED FOR CABLE TERMINATION. RAYCHEM IS ONE OF THE MOST LEADING BRAND FOR CABLE TERMINATION AND JOINTING . THE HAVE THE MAXIMUM LIFE WHEN INSTALLED PROPERLY . WE ARE AUTHORISED DISTRIBUTORS OF RAYCHEM 
WE ARE ONE OF THE BIGGEST DISTRIBUTORS IN NORTH FOR RAYCHEM . WE PROVIDE QUALITY MATERIAL TO OUR CUSTOMERS                  

Product Details:

3M  Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

Kit Components

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

• Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
• Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
• Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
• Lugs to provide high-performance connections.
• Cleaning Solvent Pouches to clean the XLPE insulation surface.
• Worm Clips to ensure good electrical connection.
• Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
• Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
• Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
• Ferrules to protect against damage, splitting or wear.
• Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
• Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
• Steel Canister to be wrapped over the joints

Specifications

• Quick Cable Preparation
• Suitable for all types of conductors and connection shapes
• Environmental sealing by specially developed sealants
• Effective and reliable stress control
• Compact dimensions
• Immediate energisation possible

Additional Information:

• Delivery Time: READY

Product Details:

3M  Kit offers reliability and flexibility to meet the demands of cable network operators. The joints are available for 11, 22 & 33 kV. The kit provides a lightweight, compact, and environmentally sealed system for splicing extruded dielectric shielded power cables. The kit consists of heat shrinkable tubing, moulded parts, mastics and other accessories for making a complete joint.

Kit Components

All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.

• Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end splices. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
• Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
• Lug Sealing Tubes to protect the interface between the splice lug and the cable core covered with the non-tracking MV tube.
• Lugs to provide high-performance connections.
• Cleaning Solvent Pouches to clean the XLPE insulation surface.
• Worm Clips to ensure good electrical connection.
• Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
• Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
• Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
• Ferrules to protect against damage, splitting or wear.
• Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
• Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable splices with pressure-sensitive rubber-based adhesive.
• Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field
• Steel Canister to be wrapped over the joints

Specifications

• Quick Cable Preparation
• Suitable for all types of conductors and connection shapes
• Environmental sealing by specially developed sealants
• Effective and reliable stress control
• Compact dimensions
• Immediate energisation possible

Additional Information:

• Delivery Time: READY